SSP is a magnetic pump complying strictly with the USA 3A and Europe EHEDG sanitary standards, so can replace the traditional mechanical-sealed pump. If you have ever been in troubles for problems caused by the mechanical seal such as leakage, contamination, difficult and expensive maintenance, the SSP can be the best solution.
Applying a technology ‘Magnetic Coupling’, SSP has completely enclosed structure which a mechanical seal is removed. And outstanding safety and sanitation of SSP makes excellent efficiency when it is applied under condition of pumping dangerous or sanitary liquid which leakage or contamination by pollutant from outside should never occur.
| Model | Max. Flow Max. Head |
|---|---|
| SSP - 150 | 15㎥/Hr 25M |
| SSP - 200 | 40㎥/Hr 40M |
| SSP - 250 | 50㎥/Hr 55M |
| Specification |
|---|
▶ Casing
|
▶ Impeller
|
▶ Bearing
|
▶ Housing
|
▶ Drive Unit
|
|
※ If special materials are required, Please contact us. 
|
| SSP 150 | SSP 200 | SSP 250 | |
|---|---|---|---|
| A | 525 | 605 | 680 |
| B | 375 | 460 | 500 |
| C | 290 | 350 | 350 |
| D | 50.5(1.0S) | 50.5(1.5S) | 50.5(1.5S) |
| E | 50.5(1.5S) | 64(2.0S) | 77.5(2.5S) |
| F | 34 | 55 | 50 |
| G | 65 | 86 | 106 |
| H | 130 | 180 | 200 |
| I | 218 | 240 | 260 |
| J | 144 | 194 | 220 |
| K | 204 | 254 | 307 |
※ Dimension may vary depending on the type of driveunit.
※ Above table is based on general specifications. Please contact SEDNA technical support for special specifications.
Expansion
Expansion
